Introduction

Cars are one of the most essential modes of transportation in our daily life. The headlight is an important aspect of a car's exterior, as it helps to provide a clear vision of the road ahead, especially during nighttime driving. However, the headlight cover can become faded due to the constant exposure to sunlight, heat, and other environmental factors, leading to a decrease in the brightness of the headlight. In this blog, we will discuss how to fix a faded headlight cover and explore the cost to replace headlight assembly.

Why is it important to fix a faded headlight cover?

A faded headlight cover can reduce the visibility of the road ahead, making it difficult for the driver to see the road clearly. This can lead to a higher risk of accidents, especially during nighttime driving. In addition, a faded headlight cover can also make a car look older and reduce its overall aesthetic appeal.

Materials Needed

Sandpaper
Plasti Dip spray
Tack cloth
Masking tape
Clean rags
Microfiber cloth
Steps to Fix a Faded Headlight Cover

Step 1: Clean the Headlight Cover
Before starting the process of fixing a faded headlight cover, it is important to clean the headlight cover thoroughly. This can be done by using a clean rag and a mild soap solution to remove any dirt, grime, or debris from the surface.

Step 2: Sand the Headlight Cover
Once the headlight cover is clean, use sandpaper to gently sand the surface of the headlight cover. Start with a coarse grit sandpaper and then progress to a finer grit sandpaper. This will help to remove any oxidation and rough spots from the surface of the headlight cover.

Step 3: Apply Masking Tape
To protect the surrounding areas of the headlight cover from being sprayed with Plasti Dip, apply masking tape around the edges of the headlight cover. This will ensure that only the headlight cover is being coated with the Plasti Dip spray.

Step 4: Spray with Plasti Dip
Shake the can of Plasti Dip spray well before using it. Hold the can about 8-10 inches away from the headlight cover and apply an even, thin layer of Plasti Dip to the surface. Wait for the first layer to dry before applying additional coats. Typically, 2-3 coats are sufficient to achieve the desired level of opacity.

Step 5: Remove the Masking Tape
Once the Plasti Dip has dried completely, remove the masking tape carefully to avoid peeling off any of the newly applied Plasti Dip.

Step 6: Buff the Headlight Cover
To give the headlight cover a glossy finish, use a microfiber cloth to gently buff the surface of the headlight cover.

Cost to Replace Headlight Assembly

In some cases, fixing a faded headlight cover may not be enough to restore its original brightness. In such cases, it may be necessary to replace the entire headlight assembly. The cost to replace a headlight assembly can vary depending on the make and model of the car, as well as the type of headlight assembly being installed. On average, the cost to replace a headlight assembly ranges from $200 to $800.

Conclusion

Fixing a faded headlight cover is a simple and cost-effective way to restore the brightness of a car's headlight. By following the steps outlined in this blog, anyone can fix a faded headlight cover and improve the visibility of the road ahead, as well as the overall appearance of the